Frequently Asked Questions (FAQ)

A smooth round body suits general fastening needs; straight knurling increases engagement with the plate; and a hex body improves anti-rotation performance through geometric fit.

A smooth round body suits general fastening needs; straight knurling increases engagement with the plate; and a hex body improves anti-rotation performance through geometric fit.

How to Choose Between Round, Straight-Knurled, and Hex Rivet Nuts?

The main differences between round-body, straight-knurled, and hex rivet nuts lie in the body structure and how they resist rotation once installed.

A smooth round-body rivet nut suits general threaded fastening needs; a straight-knurled rivet nut uses surface knurling to increase mechanical engagement with the plate; and a hex rivet nut relies on the geometric fit between its hexagonal body and a matching hole shape to improve anti-rotation performance. Actual selection should still be evaluated based on the plate material, hole shape, installation conditions, and usage requirements.


1. Round Rivet Nuts | Simple Structure, Widely Used

With a round exterior, this is one of the most common rivet nut designs.

Its structure is relatively simple and suits general threaded fastening needs. It can be found across a wide range of products and plate applications.

Features of the round design:

  • Round outer shape
  • Simple structure
  • Suitable for general fastening needs
  • Can be paired with different installation methods depending on the product design

The anti-rotation ability of a round structure is affected by the plate, hole diameter, installation method, and actual operating conditions. If the product will be subject to high torque or has higher anti-rotation requirements, additional structural features are needed.

2. Round + Straight-Knurled Rivet Nuts | More Engagement for Better Anti-Rotation

A straight-knurled rivet nut has a special knurled pattern on its outer surface.

These patterns are not merely cosmetic. They create better mechanical engagement between the rivet nut and the plate, thereby improving anti-rotation performance after installation.

Features of straight knurling:

  • Knurled pattern on the outer surface
  • Increases contact and engagement between the rivet nut and the plate
  • Suitable for applications with a certain level of anti-rotation requirement
  • Suitability can be evaluated based on plate and hole diameter conditions

When the product may be subjected to rotational torque during assembly or use, straight knurling can be one of the options for improving anti-rotation performance. However, actual anti-rotation performance depends not only on the knurled structure but also on the plate material, thickness, hole accuracy, and installation conditions.

In general, the plate material needs to be softer than the rivet nut so that the knurls can bite effectively into the plate and form a good mechanical engagement. If the plate is too hard for the knurls to bite in fully, torque resistance may be reduced, increasing the risk of the rivet nut spinning freely after installation.

3. Hex Rivet Nuts | Using Geometry to Improve Anti-Rotation

A hex rivet nut has a hexagonal exterior. Compared with a round exterior, the hexagonal shape can engage with the hole in the plate to provide a more definite anti-rotation mechanism.

Features of the hex design:

  • Hexagonal outer structure
  • Clear geometric anti-rotation characteristics
  • Suitable for applications with higher anti-rotation requirements
  • Requires a suitable hole shape and machining conditions

When the product is subject to high torque, or when the threaded fastening point has higher anti-rotation requirements, a hex rivet nut can be included in the evaluation. Even so, its actual effectiveness still needs to be confirmed against the plate, hole shape, dimensions, and installation conditions.

4. The Main Differences Between Round, Straight-Knurled, and Hex Rivet Nuts

The main differences between the three are structure and anti-rotation method. The following principles can guide selection:

  • Round body: Suitable for general threaded fastening needs.
  • Straight knurled: Uses surface knurling to increase mechanical engagement with the plate; can be considered for applications with anti-rotation requirements.
  • Hex body: Uses the geometric fit between the hex body and a matching hex hole; suited to applications with higher anti-rotation requirements.

Each of the three structures has its own suitable conditions, and there is no single best choice for every situation. Actual selection should still take into account the plate material, plate thickness, mounting hole shape and diameter, rivet nut specification, and installation conditions, in order to confirm the right product structure.

Need Help Choosing the Right Rivet Nut Structure?

If you are not sure whether to choose a round, knurled, or hex rivet nut, please send us your plate material, plate thickness, mounting hole shape, and anti-rotation requirements, and contact Jieluo (傑螺) to discuss the most suitable rivet nut structure and product specification.

How to Choose Between Round, Straight-Knurled, and Hex Rivet Nuts? | Your Source for Durable Multistage Cold Forged Fasteners

Super Nut is a leading manufacturer specializing in high quality multi-stage cold forged fasteners and hardware products. With a robust product line that includes rivet nuts, rivet studs, sleeve nuts and blind rivet studs, we serve a diverse range of industrial needs worldwide. Our commitment to excellence and innovation ensures reliable, precision engineered fastening solutions that meet the highest standards. Trusted by businesses around the world, Super Nut continues to set the standard in the fastener industry by providing unparalleled product quality and customer service.

Super Nut was founded in Changhua, Taiwan. The company primarily serving in the Industrial fastening for both OEM and aftermarket , which includes in the sectors of Automotive, Electronics, Home Appliances and Constructional use. Combined with powerful capacity, our production specialty includes Rivet Nut production, Multistage cold forming parts, Clinching parts, or any sort of fasteners that are applied in the installation process.

Super Nut has been providing customers with environmentally friendly fastener solutions since 2009, with both advanced technology and 35 experience, Super Nut ensures that each customer's needs are met.