BOLT RIVET NUTS
ISL (INSTALLED STUD LENGTH) DIMENSION IS
BASED ON MAX. GRIP INSTALLATION.
TO CALCULATE THE ACTUAL ISL IN A SPECIFIC
GRIP, USE THE FOLLOWING FORMULA.
MAX. GRIP – ACTUAL GRIP = GRIP DIFFERENCE
ISL + GRIP DIFFERENCE = ACTUAL ISL
|
PART |
THREAD |
THREAD |
GRIP |
GRIP |
STUD LENGTHS MIN. |
HOLE SIZE |
HD |
HH |
L |
D |
IL |
TOOL |
DYNAMIC |
||
|
ISL |
ISL |
ISL |
|||||||||||||
|
CALL |
CALL |
CALL |
|||||||||||||
|
TSBS 632-B |
6-32 UNC |
632 |
.020-.080 |
80 |
.500 |
.625 |
.750 |
17/64 (.2656) |
.390 |
.030 |
.485 |
.265 |
.360 |
3000 |
70-80 |
|
500 |
625 |
750 |
|||||||||||||
|
TSBS 632-BL |
6-32 UNC |
632 |
.080-.130 |
130 |
.450 |
.575 |
.700 |
17/64 (.2656) |
.390 |
.030 |
.535 |
.265 |
.360 |
3000 |
70-80 |
|
450 |
575 |
700 |
|||||||||||||
|
TSBS 832-B |
8-32 UNC |
832 |
.020-.080 |
80 |
.500 |
.625 |
.750 |
17/64 (.2656) |
.390 |
.030 |
.485 |
.265 |
.360 |
3000 |
75-90 |
|
500 |
625 |
750 |
|||||||||||||
|
TSBS 832-BL |
8-32 UNC |
832 |
.080-.130 |
130 |
.450 |
.575 |
.700 |
17/64 (.2656) |
.390 |
.030 |
.535 |
.265 |
.360 |
3000 |
75-90 |
|
450 |
575 |
700 |
|||||||||||||
|
TSBS 1024-B |
10-24 UNC |
1024 |
.020-.130 |
130 |
.500 |
.625 |
.750 |
19/64 (.2969) |
.415 |
.030 |
.545 |
.296 |
.380 |
1500 |
60-80 |
|
500 |
625 |
750 |
|||||||||||||
|
TSBS 1024-BL |
10-24 UNC |
1024 |
.130-.225 |
225 |
.405 |
.530 |
.655 |
19/64 (.2969) |
.415 |
.030 |
.655 |
.296 |
.380 |
1500 |
60-80 |
|
405 |
530 |
655 |
|||||||||||||
|
TSBS 1032-B |
10-32 UNF |
1032 |
.020-.130 |
130 |
.500 |
.625 |
.750 |
19/64 (.2969) |
.415 |
.030 |
.545 |
.296 |
.380 |
1500 |
60-80 |
|
500 |
625 |
750 |
|||||||||||||
|
TSBS 1032-BL |
10-32 UNC |
1032 |
.130-.225 |
225 |
.405 |
.530 |
.655 |
19/64 (.2969) |
.415 |
.030 |
.655 |
.296 |
.380 |
1500 |
60-80 |
|
405 |
530 |
655 |
|||||||||||||
|
TSBS 420-B |
1/4-20 UNC |
420 |
.027-.165 |
165 |
.625 |
.8125 |
1.000 |
25/64 (.3906) |
.500 |
.030 |
.670 |
.390 |
.465 |
900 |
70-90 |
|
625 |
8125 |
1000 |
|||||||||||||
|
TSBS 420-BL |
1/4-20 UNC |
420 |
.165-.260 |
260 |
.530 |
.7175 |
.905 |
25/64 (.3906) |
.500 |
.030 |
.770 |
.390 |
.465 |
900 |
70-90 |
|
530 |
7175 |
905 |
|||||||||||||
|
TSBS 518-B |
5/16-18 UNC |
518 |
.027-.150 |
150 |
.625 |
.875 |
1.125 |
17/32 (.5312) |
.685* |
.035 |
.810 |
.530 |
.555 |
600 |
80-110 |
|
625 |
875 |
1125 |
|||||||||||||
|
TSBS 518-BL |
5/16-18 UNC |
518 |
.150-.312 |
312 |
.463 |
.713 |
.963 |
17/32 (.5312) |
.685* |
.035 |
.925 |
.530 |
.510 |
600 |
80-110 |
|
463 |
713 |
963 |
|||||||||||||
|
TSBS 616-B |
3/8-16 UNC |
616 |
.027-.150 |
150 |
.750 |
1.000 |
1.250 |
17/32 (.5312) |
.685* |
.035 |
.810 |
.530 |
.555 |
600 |
80-110 |
|
750 |
1000 |
1250 |
|||||||||||||
|
TSBS 616-BL |
3/8-16 UNC |
616 |
.150-.312 |
312 |
.588 |
.838 |
1.088 |
17/32 (.5312) |
.685* |
.035 |
.925 |
.530 |
.510 |
600 |
80-110 |
|
588 |
838 |
1088 |
|||||||||||||
|
PART |
THREAD |
THREAD |
GRIP |
GRIP |
STUDLENGTHS MIN. |
HOLE SIZE |
HD |
HH |
L |
D |
IL |
TOOL |
DYNAMIC |
||
|
ISL |
ISL |
ISL |
|||||||||||||
|
CALL |
CALL |
CALL |
|||||||||||||
|
TSBS 470-B |
M4×0.7 ISO |
470 |
0.50-2.00 |
2.0 |
12,0 |
15,0 |
20,0 |
6.75 |
9.91 |
0.76 |
12.32 |
6.73 |
9.15 |
3000 |
4.8-5.5 |
|
12 |
15 |
20 |
|||||||||||||
|
TSBS 470-BL |
M4×0.7 ISO |
470 |
2.00-3.30 |
3.3 |
10,7 |
13,7 |
18,7 |
6.75 |
9.91 |
0.76 |
13.59 |
6.73 |
9.15 |
3000 |
4.8-5.5 |
|
10.7 |
13.7 |
18.7 |
|||||||||||||
|
TSBS 580-B |
M5×0.8 ISO |
580 |
0.50-3.30 |
3.3 |
12,0 |
15,0 |
20,0 |
7.60 |
10.54 |
0.76 |
13.84 |
7.52 |
9.65 |
1500 |
4.1-5.5 |
|
12 |
15 |
20 |
|||||||||||||
|
TSBS 580-BL |
M5×0.8 ISO |
580 |
3.30-5.70 |
5.7 |
9,6 |
12,6 |
17,6 |
7.60 |
10.54 |
0.76 |
16.64 |
7.52 |
9.65 |
1500 |
4.1-5.5 |
|
9.6 |
12.6 |
17.6 |
|||||||||||||
|
TSBS 610-B |
M6×1.0 ISO |
610 |
0.70-4.20 |
4.2 |
15,0 |
20,0 |
25,0 |
10.00 |
12.70 |
0.76 |
17.02 |
9.91 |
11.81 |
900 |
5.5-6.2 |
|
15 |
20 |
25 |
|||||||||||||
|
TSBS 610-BL |
M6×1.0 ISO |
610 |
4.20-6.60 |
6.6 |
12,6 |
17,6 |
22,6 |
10.00 |
12.70 |
0.76 |
19.56 |
9.91 |
11.81 |
900 |
5.5-6.2 |
|
12.6 |
17.6 |
22.6 |
|||||||||||||
|
TSBS 8125-B |
M8×1.25 ISO |
8125 |
0.70-3.80 |
3.8 |
16,0 |
22,0 |
28,0 |
13.50 |
17.40* |
0.89 |
20.57 |
13.46 |
14.10 |
600 |
5.5-7.5 |
|
16 |
22 |
28 |
|||||||||||||
|
TSBS 8125-BL |
M8×1.25 ISO |
8125 |
3.80-7.90 |
7.9 |
11,9 |
17,9 |
23.9 |
13.50 |
17.40* |
0.89 |
23.50 |
13.46 |
12.96 |
600 |
5.5-7.5 |
|
11.9 |
17.9 |
23.9 |
|||||||||||||
|
TSBS 1015-B |
M10×1.5 ISO |
1015 |
0.70-3.80 |
3.8 |
20,0 |
25,0 |
30,0 |
13.50 |
17.40* |
0.89 |
20.57 |
13.46 |
14.10 |
600 |
5.5-7.5 |
|
20 |
25 |
30 |
|||||||||||||
|
TSBS 1015-BL |
M10×1.5 ISO |
1015 |
3.80-7.90 |
7.9 |
15,9 |
20,9 |
25,9 |
13.50 |
17.40* |
0.89 |
23.50 |
13.46 |
12.96 |
600 |
5.5-7.5 |
|
15.9 |
20.9 |
25.9 |
|||||||||||||
NOTE 1：Grip range can be affected by parent material density and actual hole size.
We suggest trial installations to determine optimum grip.
NOTE 2：Additional UNF fine threads, grip lengths and materials are available.
Thread Specification：
Unified – 2A/21 per ASME B1.1
Metric – 6g/21 per ASME B1.21M
PERFORMANCE DATA
|
THREAD SIZE |
PULL OUT IN POUNDS AND KILO-NEWTONS |
PUSH OUT LBS. -kN |
TORQUE OUT |
SUGGESTED |
||||||||
|
IN STEEL SHEET |
IN ALUMINUM SHEET |
IN STEEL |
IN STEEL |
IN ALUM. |
INCH LBS. -Nm |
|||||||
|
.030 |
.062 |
.090 |
.125 |
.030 |
.062 |
.090 |
.125 |
.125 3,17 |
.062 |
.062 |
PLATED SCREW |
|
|
6-32 UNC |
316 |
817 |
1347 |
1952 |
276 |
898 |
1464 |
1604 |
628 |
20 |
20 |
12 |
|
8-32 UNC |
316 |
773 |
1428 |
2000 |
275 |
828 |
1341 |
1571 |
623 |
31 |
32 |
22 |
|
10-24 UNC |
473 |
971 |
1694 |
2127 |
325 |
964 |
1626 |
1967 |
578 |
47 |
48 |
32 |
|
10-32 UNF |
473 |
971 |
1694 |
2127 |
325 |
964 |
1626 |
1967 |
578 |
56 |
53 |
36 |
|
1/4-20 UNC |
570 |
1196 |
2244 |
2983 |
411 |
1157 |
2269 |
2892 |
874 |
142 |
147 |
75 |
|
5/16-18 UNC |
703 |
2034 |
3066 |
4501 |
463 |
1435 |
2591 |
3896 |
1134 |
262 |
261 |
156 |
|
3/8-16 UNC |
703 |
1509 |
2551 |
4501 |
601 |
1554 |
2709 |
3850 |
1155 |
610 |
620 |
276 |
|
M4×0.7 ISO |
1.4 |
3.4 |
6.3 |
8.8 |
1.2 |
3.6 |
5.9 |
6.9 |
2.7 |
3.1 |
3.2 |
2.5 |
|
M5×0.8 ISO |
2.1 |
4.3 |
7.5 |
9.4 |
1.4 |
4.2 |
7.2 |
8.7 |
2.5 |
6.1 |
6.1 |
5.0 |
|
M6×1.0 ISO |
2.5 |
5.3 |
9.9 |
13.2 |
1.8 |
5.1 |
10.0 |
12.8 |
3.8 |
18.4 |
17.8 |
8.6 |
|
M8×1.25 ISO |
3.1 |
9.0 |
13.6 |
20.0 |
2.0 |
6.3 |
11.5 |
17.3 |
5.0 |
49.6 |
47.4 |
21 |
|
M10×1.5 ISO |
3.1 |
6.7 |
11.3 |
20.0 |
2.6 |
6.9 |
12.0 |
17.1 |
5.1 |
88.1 |
90.3 |
42 |
The Bolt Rivet Nut features a round serrated body that installs in the same fashion as a Blind Rivet Nut.
The Bolt Rivet Nut is an ideal alternative to weld studs and clinching stud.
The Bolt Rivet Nut fastener makes fastening easy as they:
- Install blind eliminating the need to access the backside of the work piece.
- Install into galvanized or pre-painted material without damaging surface.
- Install without warping the work piece.
- Install after finish to eliminate thread masking.
- Install into material as then as .020” or 5mm.
- Install without producing harmful dust, gas or electromagnetic fields.
- Install into a wide range of material type or thickness.
- Install with hand help pneumatic tools at any location on the assembly
As the Bolt Rivet Nut is installed, the knurled body
expands 360° filling the hole. This feature provides
exceptional torque strength and vibration
resistance. The installation tool then continues to
install the stud forming a backside flange even in
variable thickness material without adjustment.
The Bolt Rivet Nut fastener is available in M4 to M10 thread size in steel with Zinc/Yellow finish.
It is deal for applications on vertical surfaces where the mating component can be “hung” on the Bolt Rivet Nut before final assembly is mate with mating nut. Hexagonal heads are also available.
Superior corrosion resistance is provided by our standard Zinc/Yellow dichromate finish.
Available in steel 1010, 1008 shell-steel 10B21 threaded stud.